How much does a deck cost in Kingston, Ontario? (2026 guide)
Short answer: $35 to $90 per square foot installed, so $7,000 to $20,000 for a typical 200 sq ft deck. Here's what moves the price, with an estimator you can use right now.
Deck cost per square foot in Kingston
In the Kingston, Napanee and Quinte area, a professionally built deck in 2026 costs between $35 and $90 per square foot, installed. The material you walk on is the biggest single factor. Pressure-treated lumber sits at the low end, cedar in the middle, and composite at the top. Railing, height and stairs add on top of the square-foot figure.
| Material | Installed, per sq ft | 200 sq ft deck | 400 sq ft deck |
|---|---|---|---|
| Pressure-treated | $35 to $50 | $7,000 to $10,000 | $14,000 to $20,000 |
| Cedar | $50 to $75 | $10,000 to $15,000 | $20,000 to $30,000 |
| Composite (Trex, TimberTech, Fiberon) | $60 to $90+ | $12,000 to $18,000+ | $24,000 to $36,000+ |
These ranges line up with what other Eastern Ontario builders who publish prices report, and with our own quotes. Toronto prices run higher. The square-foot figure covers footings, frame, decking and a basic wood railing. Items below adjust it.
Deck cost estimator
Set it up the way you're picturing it. The range updates as you go.
Deck cost estimator
Indicative 2026 ranges for the Kingston area. Your written estimate after a site visit is the real number.
What changes the price of a deck
Six things move a deck quote more than anything else. Here's how each one shows up on your estimate.
| Factor | Effect on price | Why |
|---|---|---|
| Decking material | Largest: up to 2.5x | Composite boards cost three to four times pressure-treated lumber and need hidden fasteners |
| Height off the ground | +10 to 20% | Taller posts, required guards, permit drawings and inspections above 600 mm |
| Railing type | +$0 (wood) to +$4,500 (glass) | Aluminum railing runs about $60 to $90 per linear foot installed; glass more |
| Stairs | +$900 to $2,500 | Each run needs stringers, treads, a landing and often its own guard |
| Shape and levels | +5 to 15% | Angles, curves and multi-level decks waste material and take longer |
| Site access and rock | +$500 to $2,000 | Limestone under Kingston and Napanee lawns means coring footings instead of digging |
Example deck prices in the Kingston area
These are representative configurations priced at 2026 rates, not quotes for a specific property.
| Deck | Spec | Typical price |
|---|---|---|
| Ground-level platform | 12x12 pressure-treated, no railing, under 600 mm | $5,000 to $7,000 |
| Back-door deck | 12x16 pressure-treated, wood railing, 4 stairs, 900 mm high | $8,500 to $11,500 |
| Composite upgrade | 12x16 composite, aluminum railing, 4 stairs | $15,500 to $20,000 |
| Two-level entertaining deck | 16x20 upper + 12x12 lower, composite, aluminum rail, two stair runs | $32,000 to $42,000 |
| Hot tub deck | 12x14 pressure-treated, reinforced framing for 2,000 kg, privacy screen | $9,000 to $13,000 |
What's in a Limitless Build deck quote
- Site visit, measurements and a scaled drawing
- Permit drawings and the DASH application when a permit is needed (city fee billed at cost)
- Locates, excavation or rock coring, concrete footings to 1.2 m
- All framing in pressure-treated lumber with galvanized hardware, ledger flashed to the house
- Decking, stairs and railing as specified, with fasteners matched to the material
- Clean-up, waste removal and a final walkthrough
- Written warranty on our workmanship, plus the manufacturer's warranty on composite boards
Not included unless listed: electrical, landscaping repair beyond the work area, and removal of an existing deck (quoted separately).
Ready for a real number? Request a free estimate, or read about deck permits in Kingston first. We also build concrete patios and walkways if you want a landing or path to go with the deck.
Get your deck estimate
Send a few details and we'll call to book a site visit. Photos help, and you can send them once we reply. If you used a tool on this page, your answers come through with the form.
Phone: 343-459-7466
Hours: Mon to Fri, 8 am to 5 pm
Office: 945 Princess Street, Kingston, ON K7L 3N6
Deck cost questions
How much does a 12x16 deck cost in Ontario?
A 12x16 (192 sq ft) pressure-treated deck with wood railing runs about $7,000 to $10,000 installed in the Kingston area in 2026. In composite with aluminum railing, plan on $14,000 to $19,000. Height, stairs and site access move the number.
What is the cheapest way to build a deck?
A ground-level, pressure-treated deck with no railing (allowed when the surface is under 600 mm) is the least expensive deck we build. It skips the permit, the guards and the taller posts.
Is composite decking worth it in Ontario?
If you'll own the deck more than about 15 years, usually yes. The higher build cost is offset by never staining it, and by boards that don't split in freeze-thaw cycles. Our comparison page has a slider that shows the crossover.
Does a deck add value to a house?
Realtors in the Kingston market consistently list an outdoor living space among the features buyers ask for. Cost-vs-value surveys in North America typically report wood decks recovering a large share of their cost at resale; we don't promise a specific figure.
How much does it cost to replace deck boards?
Re-decking a sound frame costs roughly 40 to 60 percent of a new deck, since the footings and frame are reused. We check the frame first; if posts or joists are soft, a rebuild is the honest answer.
Do you charge for estimates?
No. Site visits and written estimates are free across our service area.